PRAY FOR DRILL Unisex Shorts
📞Contact Supplier.
🌎Free shipping to Spain.
✅30-Day Satisfaction Guarantee.
💎 PREMIUM Trapper Product.
Additional Information.
!This product is true to size!
Please check the size charts before ordering, thank you!
Product details.
Modern design unisex shorts with a waist adjustment and pockets on each side. They are made of polyester for a more urban style.
- 100% polyester, blended with 25% combed and ring-spun airlume cotton.
- Side seams.
- Overlock polyester stitching.
- Double-lined interior.
- Side pockets.
- Waist adjustment.
The following table shows the measurements of the product. If you are not sure which size is the most ideal for you, you can compare it with something you normally wear. If you have more questions, you can review the size guide!
(There may be a difference of 1 to 3 cm).
Size Guide in Centimeters
| Size | Length (cm) | Waist (cm) | Hip (cm) |
|---|---|---|---|
| S | 41 | 72 | 105 |
| M | 42.5 | 80 | 112 |
| L | 44 | 88 | 119 |
| XL | 45.5 | 96 | 126 |
| 2XL | 47 | 104 | 133 |
Size Guide in Inches
| Size | Length (inch) | Waist (inch) | Hip (inch) |
|---|---|---|---|
| S | 16.14 | 28.35 | 41.34 |
| M | 16.73 | 31.50 | 44.09 |
| L | 17.32 | 34.65 | 46.85 |
| XL | 17.91 | 37.80 | 49.61 |
| 2XL | 18.50 | 40.94 | 52.36 |
Product Measurements
A - Waist: Place the tape just above the waistband of the pants and measure from end to end.
B - Hip: Place the beginning of the tape measure at one hip, just before the leg begins, and measure from end to end.
C - Length: Place the end of a tape measure next to the waist at the top of the garment. Pull the tape to the bottom of the item.
*The measurement guide shown on this product is for EUR (Europe) sizing. This size guide is indicative and should be reviewed with the measurements of the product.
The first table (EUR) is shown in CM-KG.
The second table (US) is shown in FT/IN-LBS
Values
Height (A) : It is the height of the person.
Weight (B) : It is the person's body weight.
Table of measures in EUR
US Size Chart
Care instructions
To maintain the quality of the garment and extend its lifespan, we recommend washing the sweatshirt inside out with neutral detergents and using cold water (max. 30°C). Avoid soaking, direct sunlight, or bleach. It's best to dry flat and in the shade to maintain its original shape. Tumble drying is not recommended. When ironing, do so at a low temperature or with steam, always avoiding applying heat directly to the print; instead, use a protective cloth.
Key points
- Wash inside out with neutral detergents
- Machine wash cold (max. 30℃) with similar colors
- Do not soak or use bleach.
- Avoid direct exposure to the sun
- Do not tumble dry to avoid shrinkage; dry flat and in the shade.
- Iron or steam at low temperature (max. 30℃ or 90℉)
- Do not iron directly on the print.
